DC-100 DESCALER & WATER SPOT REMOVER is the most effective descaler and water-spot remover on the market and is very effective for cleaning closed coil systems. While maintaining exceptional environmental properties, DC-100 DESCALER doesn’t compromise performance.

  • Removes water spots and scale effortlessly
  • 3 times more effective than phosphoric acid
  • 4-10 times more effective than citric and glycolic acid
  • Not DOT regulated; offers lower transportation cost
  • Ideal to be used in concentrate or diluted
  • Contains surfactants to enhance cleaning

  • MARPOL Annex III and Annex V Compliant
  • NPDES Compliant
  • REACH Compliant
  • Excellent aquatic toxicity profile
  • Readily Biodegradable
  • No VOC's
  • Non-fuming
  • Non-corrosive to skin
  • Non-corrosive to mild steel

DC-100 DESCALER can be used in concentrated or diluted form, depending on the need for maintenance and cleaning. Dilute with clean water (128 to 10 ounces per gallon of water). For best results, apply DC-100 DESCALER on the surface to be cleaned. Allow it to affect the surface for 30 seconds to 5 minutes. Brush the surface if needed. Rinse with clean water. Rinse all metal surfaces with ELITE APC in order to neutralize the surface.

DC-100 DESCALER is available in 1-gallon HDPE containers.

  • Ceramic
  • Glass
  • Plastic
  • Fiber Glass
  • Rubber
  • Paint
  • Polymer Surfaces

Appearance: Clear amber liquid
Solubility: 100% in water
PH: <1.0
SMDS Safety Information